Thanks for your browsing the website

Product samples for Jiangyin Spark Electronic Technology Co., LTD. Are exhibited in GMPC of ETW Japan .

Address: AIM Bld.1F Asano3-8-1 Kokurakita-Ku Kitakyushu city Japan

Open Time: Monday ~ Friday Tokyo 9:30-17:30 (All Year)

Booth No.: 16


  • Rogowski Coil Because of advantages such as real-time current measurement, fast responding speed, no magnetic saturation, virtually no phase error, etc., Rogowski coil is often used for occasions where the distorted signal often occurs, including relay protection, silicon controlled rectifier, variable frequency speed control ...
  • Split Core Current Transformer, 0.333V Output The split core current transformer, 0.333V output can be installed without disconnecting cable or busbar circuit, thus meeting the growing demand for retro-fitting especially installation into existing networks. It is widely used in the energy management systems, ammeters, watt-hour meters, instrumentation...
  • Mini Clip-on Split Core Current Sensor The T10 mini clip-on split core current sensor has the smallest maximum input current among the SCT series. Its model name is SCT-T10. This product can turn the input current into smaller output 0.333V or mA for safe test by measuring devices.
  • Split Core Current Transformer 1A or 5A OutputThe DP series current split core current transformer is specially designed for facilitating the installation in new or already existing networks. It can join the electrical system without opening any cable or bus-bar circuit. The conventional CT usually requires the interruption of the primary-side circuit...
  • XH-SCT-T24 Split Core Current Transformer The split core structure makes the transformer convenient for mounting and dismounting.
    While operating with rated current, the electronic test equipment supports optional 1A or 5A current outputs.
  • XH-SCT-T36 Split Core Current Transformer With compact structure design, the split core current transformer is economical, practical and portable. It is easy for mounting and dismounting because of its split core design. Built according to CE and ETL standards, the split core current sensor is very popular among our worldwide customers.
  • Clamp-on Current Transformer The clamp-on current transformer is very popular with our customers due to its fast and easy installation. Produced with amorphous silicon core or permalloy core, this product features small size, high precision, good stability and good anti-interference.
  • Split Core DC Current Transducer The SCT-0010-BS split core DC current transducer can transform the input AC current signal into standard DC current signal, and then output the converted current signal in the form of constant voltage and current.
  • Solid Core Current Transformer The XH-BCT series solid core current transformer features the high accuracy of output current, small size and high cost performance rate. E.g. the accuracy of output current can be 0.1%, if the product is working in the mode of "mA" secondary output. In addition, the product has 5 standard models for your choice.
  • DC Immune Current Transformer (40-200A) To meet this demand, we have especially developed the DC immune current transformer which features high precision and great immune to DC component. This type of current sensor is often used in electronic watt-hour meters which are required to measure both AC and DC energy values...
  • Wire Lead Current Transformer The wire lead current transformer can convert large AC current into small current. Compared with normal current transformer, our product can get a lower output current in accuracy of milliamperes. Approved by CE and fully compliant to RoHS, it can be used in precise current test ...
  • PCB Current Transformer As one type of our current transformer products, the PCB current transformer is also used to stably turn high current into low current to effectively perform measurement on high current circuit. This product is packaged with pins, and can be easily and directly mounted on PCB.
  • 260 OHM Mini Voltage Transformer The 260 Ohm mini voltage transformer is a voltage transformer product with high voltage conversion accuracy of 0.1 or 0.2. In rated working condition, the currents in the input and the output circuit are both 2mA, but the output voltage is distinctly lower than the input voltage...
  • 400 OHM Mini Voltage Transformer Model: WPT1PD
    Primary and Secondary Resistance(ohms): ≤ 400
    Rated Current Ratio (mA): 1 : 1
    Suggested Load Resistance(ohm): ≤ 500
  • 120 OHM Mini Voltage Transformer Model: WPT2PF
    Primary and Secondary Resistance(ohms): ≤ 90
    Rated Current Ratio (mA): 2 : 2
    Suggested Load Resistance(ohm): ≤ 600
  • 80 OHM Mini Voltage Transformer The 80 Ohm mini voltage transformer is wrapped and covered by epoxy resin packaging so that the insulation strength is pretty high. This product is ideal for PCB mounting. We provide two models. The input current and output current of WPB1PB are both 1mA, while the ones of WPB2PB are both 2mA...
  • 260 OHM Voltage Transformer The 260 Ohm mini voltage transformer is characterized by high consistency and easy PCB mounting. It is wrapped and covered by epoxy resin packaging to provide high insulation strength...
  • 80 OHM Voltage Transformer Model: WPT1PE
    Primary and Secondary Resistance(ohms): ≤80
    Rated Current Ratio (mA): 1 : 1
    Suggested Load Resistance(ohm): ≤ 250

We provide various products such as split core current transformer, current transformer, transformer, inductor, industrial heater, and energy saving module which can be used in electric energy meter, communication device, and measuring instrument.